UNS N10276-INCONEL alloy C-276 - Studbolt and nut ASTM A193 B7,B7M,B16,B8,B8M,A453 660,A182 F55,A182 F51,ASTM A453 660 , A 347 B4B , X12CR13 , AISI 904L , ASTM A182 F44 , INCONEL 718 UNS N07718 , NITRONIC UNS 20219 XM-19 , INCOLOY alloy 925 (UNS N09925)

Search
Go to content

Main menu:

UNS N10276-INCONEL alloy C-276

MATERIALS


MATERIALS-studbolts,hex bolts,hex cap screw , hex nuts, fasteners
MONEL® nickel-copper alloy 400 (UNS N04400/W.Nr. 2.4360 and 2.4361)

MONEL® nickel-copper alloy 400 (UNS N04400/W.Nr. 2.4360 and 2.4361)

MONEL® nickel-copper alloy 400 (UNS N04400/
W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that
can be hardened only by cold working. It has high
strength and toughness over a wide temperature range
and excellent resistance to many corrosive
environments. Composition is shown in Table 1.
Alloy 400 is widely used in many fields, especially
marine and chemical processing.
Typical applications :
are valves and pumps; pump and propeller shafts;
marine fixtures and fasteners; electrical and electronic
components; springs; chemical processing equipment;
gasoline and fresh water tanks; crude petroleum stills,
process vessels and piping; boiler feedwater heaters and
other heat exchangers; and deaerating heaters.

Nickel (plus Cobalt) .....................................................63.0 min.
Carbon..........................................................................0.3 max.
Manganese ...................................................................2.0 max.
Iron................................................................................2.5 max.
Sulfur ........................................................................0.024 max.
Silicon ...........................................................................0.5 max.
Copper ......................................................................28.0 - 34.0

 
Back to content | Back to main menu